E-MEM residential membrane components are mainly used in various household water purifiers, mineralized direct drinking machines hospitals, and laboratories, and other small systems.

SKU: EM2540 Category:
Delivery and return
Delivery and return

Next day delivery in store

Buy before 6pm to receive your order next day.
FREE

Next day delivery

Orders before 6pm from Monday to Saturday (or before 1pm on Sunday) will be delivered Next working day (except Northern Ireland and Highlands). Orders placed after 6pm (after 1pm on Sunday) or for Northern Ireland and Highlands will be delivered in 2 working days.
29 USD

Drop Point

In 2-3 working days. Pick up your parcel in one of the many diferent collection points available and during a wide range of hours.
39 USD

Same day delivery in London:

Place your order before 13:00 to get it today!. If you order later on, you’ll receive it the next day and if you order on Sunday, you’ll receive it the next working day.
59 USD
Shipping Information
Shipping Information

SHIPPING

Complimentary ground shipping within 1 to 7 business days In-store collection available within 1 to 7 business days Next-day and Express delivery options also available Purchases are delivered in an orange box tied with a Bolduc ribbon, with the exception of certain items See the delivery FAQs for details on shipping methods, costs and delivery times
Composition and care
Composition and care

Characteristics of wood :

  • Hard, compact , fiberous and porous
  • Good wood gives a rich, warm and beautiful surface.

Wood is used for the construction of:

  • Floor, Furniture, Walls
  • Incidental furnishing (lampshades, picture frames)
  • Kitchen & restaurant ware

Description

E-MEM Membranes

E-MEM residential membrane components are mainly used in various household water purifiers, mineralized direct drinking machines hospitals, and laboratories, and other small systems.

Performance parameters of the membrane element

Model Active membrane area ft2(m2) Average permeate GPD(m3/d) Salt rejection (%)
EM-RO-2540-ULP 30(2.8) 750(2.8) 99
Testing pressure 150(1.03) Testing water temperature 25°C
Concentration of testing solution 1000ppm NaCl pH value of testing solution 7.5
Testing recovery rate of single element 15% (Single membrane element production flow may vary ±20%)

Applications

 

Domestic Water Treatment

 

Commercial Water Treatment

Specification And Size

E-MEM® Element A(±2.0mm)

mm(ln.)

B(±1.0mm)

mm(ln.)

C1(±1.0mm)

mm(ln.)

C2(±1.0mm)

mm(ln.)

D(±0.1mm)

mm(ln.)

EM-RO-2540-ULP 1016(39.8) 61(2.4) 30.2(1.19) 30.2 (1.19) 19.1 (0.75)

How An RO Membrane Is Made

Below is a video that explains how an RO membrane is made

How An RO Membrane Works

Below is a video that explains how an RO membrane works

Ultimate service conditions

Membrane type Polyamide Composite Membrane
Maximum operating temperature 113℉(45℃)
Maximum operating pressure 600 psi(41.4bar)
pH range, continuous operation 3-10a
Maximum Influent SDI 5
Free chlorine tolerance <0.1 ppm b

a. When pH > 10, the maximum allowable temperature for continuous operation is 95℉(35℃).

b. Under certain conditions, the presence of free chlorine and other oxidants will lead to premature failure of membranes. Therefore, it is recommended that the membrane be pretreated to remove residual free chlorine before water comes into contact with membranes.

Application Area

E-MEM residential membrane components are mainly used in various household water purifiers, mineralized direct drinking machines, hospitals, laboratory and other small systems.

Matters Needing Attention

  1. The data and information provided by Hangzhou-MEM Environmental Technology Co., Ltd in this sample are all obtained through long-term experiments, and we are convinced that these data and information are accurate and effective. Customers are requested to use the product in strict accordance with the design, use, and maintenance requirements of the product and keep relevant data records. Hangzhou E-MEM Environmental Technology Co., Ltd shall not bear any consequences arising from customers’ failure to use and maintain the products in accordance with the conditions provided by this sample.
  2. The permeate flow listed in the table is the average value, and the deviation of a single membrane element of permeate flow is±15%.
  3. Before products leaving the factory, the dry membrane element has no protective liquid, while the wet membrane element is stored and treated with 1.0% sodium bisulfite (10% glycerin antifreeze added in winter) solution and vacuum-packed.
  4. Dry membrane elements should always be kept wet after wetting. When wet membrane element is not used for a long time, in order to prevent the growth of microorganisms, it is recommended to soak the membrane element with protective liquid containing 1.0% sodium bisulfite (food grade)(prepared with RO production water).
  5. For initial use of membrane elements, it is recommended to flush first at low pressure for 15-25 minutes and then at high pressure for 60-90 minutes (water production not less than 50% of the system design).All production and concentrated water shall be discharged within the first hour of membrane element operation.
  6. It is prohibited to add any chemical agent that has an impact on the membrane element in storage and operation. If such chemical agent is violated, Hangzhou E-MEM Environmental Technology Co., Ltd will not bear all the consequences arising therefrom.
×