Independently developed by VONTRON, the RO element ULP1812-50 is designed for the treatment of low-salinity water resources such as tap water, well water, etc. Working under extra-low pressure, it is applicable to water purifying devices in residence, hospital, and laboratory.
Next day delivery in store
Buy before 6pm to receive your order next day.Next day delivery
Orders before 6pm from Monday to Saturday (or before 1pm on Sunday) will be delivered Next working day (except Northern Ireland and Highlands). Orders placed after 6pm (after 1pm on Sunday) or for Northern Ireland and Highlands will be delivered in 2 working days.Drop Point
In 2-3 working days. Pick up your parcel in one of the many diferent collection points available and during a wide range of hours.Same day delivery in London:
Place your order before 13:00 to get it today!. If you order later on, you’ll receive it the next day and if you order on Sunday, you’ll receive it the next working day.SHIPPING
Complimentary ground shipping within 1 to 7 business days In-store collection available within 1 to 7 business days Next-day and Express delivery options also available Purchases are delivered in an orange box tied with a Bolduc ribbon, with the exception of certain items See the delivery FAQs for details on shipping methods, costs and delivery timesCharacteristics of wood :
- Hard, compact , fiberous and porous
- Good wood gives a rich, warm and beautiful surface.
Wood is used for the construction of:
- Floor, Furniture, Walls
- Incidental furnishing (lampshades, picture frames)
- Kitchen & restaurant ware
Description
VONTRON MEMBRANE
Independently developed by VONTRON, the RO element ULP1812-50 is designed for the treatment of low-salinity water resources such as tap water, well water, etc. Working under extra-low pressure, it is applicable to water purifying devices in residence, hospital, and laboratory.
About Vontron Membranes
Dimensions: millimeter (inch)
Properties and Testing Conditions
| Model | Average Permeate (GPD) | Stable Rejection (%) | Min. Rejection (%) |
| ULP1812-50 | 50 | 97.5 | 96 |
Notes: Permeate of a single element may vary within [-20%] ~ [+20%]
Testing Conditions:
Testing Pressure: 60 psi (0.41MPa)
The temperature of Testing Solution: 25°C
The concentration of Testing Solution (NaCl): 250 ppm
the pH of Testing Solution: 6.5~8.5
Recovery of Single Element: 15%
Properties and Testing Conditions
| Model | ULP-1812-50 | ULP-1812-75 | ULP- 1812-100 | |||
| Perfor-mance | Stable Desalination % | 97 | 97 | 97 | ||
| Min. Desalination % | 96 | 96 | 96 | |||
| Mean Permeable Flow GPD (L/d) | 50 (204) | 75 (281) | 100 (380) | |||
| Active Film Area ft2(m2) | 3.5 (0.32) | 4.2 (0.38) | 5.0 (0.46) | |||
| Test Conditions | Pressure | 65psi (0.45Mpa) | ||||
| Water Temp. | 25℃ | |||||
| Concentration(NaCl) | 500ppm | |||||
| Water PH | 6.5 to 7.5 | |||||
| Recovery Rate % | 15 | |||||
| Operating Conditions | Max. Operating Pressure | 200psi (2.0Mpa) | ||||
| Max. Feed Water Temp. | 45℃ | |||||
| Max. Feed Water Silt Density Index (SDI) | 5 | |||||
| Feed Water Chlorine Tolerance | < 0.1 mg/l | |||||
| Feed Water PH Range, Continuous Operation | 3 to 10 | |||||
| Feed Water PH Range, Short-Term Cleaning | 2 to 11 | |||||
| Max. Pressure Drop of Single Membrane | 10psi (0.07Mpa) | |||||
